Admins:MegaCli команды

Команды MegaCli

MegaCli лежит в /opt/lsi/MegaCli/

• flash bios

MegaCli -adpfwflash -f /scripts/firmware/lsi_imr_fw.rom -aALL

MegaCli -adpfwflash -f imr_fw.rom -NoVerChk -aAll

MegaCli -adpfacdefset -aALL # reset to factory default

• controller info

MegaCli -AdpAllinfo -aALL

MegaCli -PDGetNum -a0 # nubmer of discs

MegaCli -PDInfo -PhysDrv [64:0] -aALL

MegaCli -PDMakeJBOD -PhysDrv[64:4]

• clear controller config to defaults

MegaCli -CfgClr -aALL

• delete all

MegaCli -CfgLdDel -LALL -aALL

• create raid

MegaCli -CfgLdAdd -r5 [64:0, 64:1, 64:2, 64:3] -a0

MegaCli -CfgLdAdd -r0 [64:4,64:5,64:6,64:7] -a0

• get free devices

MegaCli -PDList -a0 | grep -e '^Enclosure Device ID:' -e '^Slot Number:'

• get raid info

MegaCli -LDInfo -Lall -aALL

MegaCli -PDMakeGood -PhysDrv[64:4] -force -aALL > /dev/null

MegaCli -PDMakeGood -PhysDrv[64:5] -force -aALL > /dev/null

MegaCli -PDMakeGood -PhysDrv[64:6] -force -aALL > /dev/null

MegaCli -PDMakeGood -PhysDrv[64:7] -force -aALL > /dev/null

MegaCli -PDMakeJBOD -PhysDrv[64:4,64:5,64:6,64:7] -a0

MegaCli -CfgLdAdd -r0 [64:4,64:5,64:6,64:7] -a0

MegaCli -AdpEventLog -GetEvents -f logfile -aALL # Dump all events from the adapters event log to a file named logfile

MegaCli -PDList -aAll # Dump information about all Phsyical Disks

MegaCli -LDInfo -LAll -aAll # Dump information about all Logical Disks on all adapters

MegaCli -LdPdInfo -aAll # Dump information of all logical and physical disks on all known adapters

MegaCli -AdpSetProp -EnableJBOD 1 -aALL

MegaCli -CfgDsply -aAll

• adapter diagnostic

MegaCli -AdpDiag -a0

• Controller information

MegaCli -AdpAllInfo -aALL

MegaCli -CfgDsply -aALL

MegaCli -AdpEventLog -GetEvents -f events.log -aALL && cat events.log

• Enclosure information

MegaCli -EncInfo -aALL

• Virtual drive information

MegaCli -LDInfo -Lall -aALL

• Physical drive information

MegaCli -PDList -aALL

MegaCli -PDInfo -PhysDrv [E:S] -aALL

• Battery backup information

MegaCli -AdpBbuCmd -aALL

Controller management

• Silence active alarm

MegaCli -AdpSetProp AlarmSilence -aALL

• Disable alarm

MegaCli -AdpSetProp AlarmDsbl -aALL

• Enable alarm

MegaCli -AdpSetProp AlarmEnbl -aALL

• Physical drive management

• Set state to offline

MegaCli -PDOffline -PhysDrv [E:S] -aN

• Set state to online

MegaCli -PDOnline -PhysDrv [E:S] -aN

• Mark as missing

MegaCli -PDMarkMissing -PhysDrv [E:S] -aN

• Prepare for removal

MegaCli -PdPrpRmv -PhysDrv [E:S] -aN

• Replace missing drive

MegaCli -PdReplaceMissing -PhysDrv [E:S] -ArrayN -rowN -aN

• Rebuild drive

MegaCli -PDRbld -Start -PhysDrv [E:S] -aN

MegaCli -PDRbld -Stop -PhysDrv [E:S] -aN

MegaCli -PDRbld -ShowProg -PhysDrv [E:S] -aN

• Clear drive

MegaCli -PDClear -Start -PhysDrv [E:S] -aN

MegaCli -PDClear -Stop -PhysDrv [E:S] -aN

MegaCli -PDClear -ShowProg -PhysDrv [E:S] -aN

• MegaCli -PDMakeGood -PhysDrv[E:S] -aN

This changes drive in state Unconfigured-Bad to Unconfigured-Good.

• Set the drive offline, if it is not already offline due to an error

MegaCli -PDOffline -PhysDrv [E:S] -aN

• Mark the drive as missing

MegaCli -PDMarkMissing -PhysDrv [E:S] -aN

• Prepare drive for removal

MegaCli -PDPrpRmv -PhysDrv [E:S] -aN

• If you’re using hot spares then the replaced drive should become your new hot spare drive:

MegaCli -PDHSP -Set -PhysDrv [E:S] -aN

• In case you’re not working with hot spares, you must re-add the new drive to your RAID virtual drive and start the rebuilding

MegaCli -PdReplaceMissing -PhysDrv [E:S] -ArrayN -rowN -aN

MegaCli -PDRbld -Start -PhysDrv [E:S] -aN

MegaCli -CfgLdAdd -r0 [0:1, 0:1] -a0

MegaCli -LDInfo -Lall -aALL

• View all controleler informations

MegaCli -AdpAllInfo -aAll

MegaCli -LDSetProp CachedBadBBU -LALL -aALL

• Delete all devices

MegaCli -CfgLdDel -LALL -aALL

MegaCli -CfgLdAdd -r1 [252:0,252:1] -a0

MegaCli -CfgLdAdd -r10 [252:0,252:1,252:2,252:3] -a0

• create RAID5

MegaCli -CfgLdAdd -r5 [64:0,64:1,64:2,64:3] -a0

• create RAID10

MegaCli -CfgSpanAdd -r10 -Array0[64:0,64:1] -Array1[64:2,64:3] -a0

• create RAID10

MegaCli -AdpSetProp -EnableJBOD 1

• Enable disks cache

MegaCli -LDSetProp EnDskCache -LAll -aAll

• Force flash

MegaCli -adpfwflash -f ./12.12.0-0111.rom -NoVerChk -a0

• load controller defauts

MegaCli -adpfacdefset -aALL